The Side-Channel and Glitching Starter Pack (Level 1) (SCAPACK-L1) is a handy collection to help you get started with power analysis. The L1 kit comes with a ChipWhisperer-Lite Capture, a UFO Board and three targets: (1) XMEGA 8-bit RISC, (1) 32-bit Cortex-M4 (STM32F3), and (1) 32-bit Cortex-M0 (STM32F0). This kit has everything you need to get started, allowing you to complete most of the free ChipWhisperer tutorials and works with the collection of CW308 UFO Boards.
ChipWhisperer-Lite integrates hardware for performing power analysis measurement, device programming, glitching, and serial communications into a single board. This allows you to program the included XMEGA or STM32F targets.
ChipWhisperer Lite Capture Board
CW308 UFO Target board with XMEGA, STM32F3, and STM32F0 targets.
SMA to BNC cable for connecting CW308 to a regular oscilloscope.
You can add an Advanced Breakout board if you plan on using targets which don't have 3.3V I/O levels. If you'll be attacking separate boards, you should check out the Level 2 kit, which is designed for attacking targets on the CW308 UFO Board (and includes the probes that you’ll likely need).
This kit has changed slightly over time.
February 2018: Removed the ChipWhisperer-Lite 2-part version "Target" side (which was duplicated with the XMEGA target already), and added a STM32F0 target.
Summer 2017: The AVR target was removed, and the STM32F3 was added in it's place.