Loading... Please wait...
  • The CW506 Advanced Breakout gives you the ability to painlessly interface to most embedded targets.
  • Built in DIP-switches let you turn on/off the various GPIO, which also lets you route signals into other test equipment. For example route the trigger output from your scope to the trigger input of the ChipWhisperer, while routing the serial RX/TX lines to your target device.
  • Handy test points along with pin headers make it easy to connect both oscilloscope probes and logic analyzers.
  • Banana input jacks let you connect a bench power supply, which can be used to either power the target device, or only as the reference voltage to determine the voltage translation levels.

Advanced Breakout Board (CW506)


Product Description

The CW506 is our "Advanced" breakout board - this board provides voltage translators to make it easier than ever to interface a variety of targets using our standard 20-pin header. It also adds loads of test points, SMA connectors for high-speed signals, DIP switches to enable/disable some of the IO, and connections for use with a standard bench PSU.

Translates the 3.3V output of the ChipWhisperer 20-pin header over a range of 1.5V to 5.5V, allowing you to interface with most embedded targets you'll come across.

This board can be used both to interface the ChipWhisperer 2-Part version to other targets, and to interface external equipment to our target boards such as the CW305 Artix FPGA target.

Available with optional cable packs:

  • 36" banana cables for power supply
  • SMA to BNC Cables (for connection to oscilloscopes, signal generators, etc)



Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

1.50 LBS
Calculated at checkout


Connect with us